在线翻译
“全滤综合水处理器”是通过压差信号来实现全自动控制的。其.. 翻译
原文(简体中文):
“全滤综合水处理器”是通过压差信号来实现全自动控制的。其工作原理如下:在系统运行过程中,首先通过压力传感器采集进水、出水的压力信号值表上,同时将进、出水压力信号值送到信号比较器进行比较,得到进出水压力差值,然后将压力差值和预先设定的压力值进行比较,当其大于预设压力值时 更多:https://www.bmcx.com/ ,就通过控制器操作使电动阀开始动作,进行反洗和排污,反冲洗完成后,系统就恢复到原来的正常过滤状态,进行正常过滤。
翻译结果(英语)1:
"The whole filter water processor to achieve automatic control differential pressure signal. Its working principle is as follows: collecting water in the system is running, the first pressure sensor, the water pressure signal value on the table, at the same time into the water pressure signal value to the signal comparator to compare, get out of the water pressure difference 更多:https://www.bmcx.com/ , then the pressure difference and the pre-set pressure value greater than the preset pressure value, the electric valve controller operation began to move, backwash and sewage backwash is complete, the system recovery to the original normal filter state, the normal filter.
翻译结果(英语)2:
"All-filter integrated water processor" is achieved by differential pressure signal automatic control. Its work principle is as follows: in system run process in the, first through pressure sensor collection intake, and water of pressure signal value table Shang, while will into, and water pressure signal value sent to signal comparison Manager for comparison, are access water pressure poor value, then will pressure poor value and advance set of pressure value for comparison 更多:https://www.bmcx.com/ , dang its is greater than preset pressure value Shi, on through controller operation makes electric valve began action, for anti-wash and sewage, anti-flush completed Hou, system on recovery to original of normal filter State, for normal filter.
翻译结果(英语)3:
"The comprehensive water filter processor" is through the pressure differential signal to realize automatic control. Its principle of work is as follows: in the system operation process, first by pressure sensors to collect water, water pressure signal value table, and inlet and outlet pressure signals will be sent to signal the comparator is compared,Get in and out of the water pressure difference value, and then will pressure difference and the predefined pressure value is used in the comparison 更多:https://www.bmcx.com/ , when the pressure is greater than the default value, is through the controller operation that electric valves began to action, reverse wash and drainage, reverse wash after completion, the system is restored to the original state of normal filter, normal filter.
欢迎关注微信公众号:诚华便民查询
1、长按上方二维码,保存至手机相册;
2、进微信扫一扫,从相册中选择识别二维码。
1、长按上方二维码,保存至手机相册;
2、进微信扫一扫,从相册中选择识别二维码。